Algin Blue Fast variant is a blue alginate powder that hardens at room temperature after mixing with water. The Algin Blue slow guarantees precision in reproduction when molding with the smallest and finest details. This alginate is therefore recommended for duplications. Importantly, this alginate is free of silica!
In general, alginate molds are most commonly used with materials such as silicone, plaster, ceramic plaster and cement. Many other products are also used for casting the moulds. It is important to always make a test beforehand to be sure that your casting material is compatible with the alginate.
The alginate has been developed for bodycasting.
Add two parts by weight of water and one part of alginate and mix the two elements together for about 60 seconds to form a homogeneous mixture. Apply the alginate to the object or body part that needs to be molded. The material cures after 9-13 minutes from the start of mixing, at a temperature of about 23°C. Before applying the alginate mixture, make sure the surface is clean, dry and free of grease. Respect the exact mixing ratio to preserve the product’s characteristics.
Online Packaging: 500 grams, 10 kg
Packaging on request: 25 kg and bulk packaging
Color: light blue
Mixing ratio: 1:2
Bulk density: 0.3 0.4 g/ml
Mixing time: 45 – 60 sec.
Set time: 1.5 – 3 min. approximately
Viscosity: 150 – 300 PA.s
From: €9,95
PolyTek
Eurosil
SG C-Sil
Platsil
Poly 74-, Poly 75- and Poly 81-series
PT Flex
EasyFlo
Poly-Optic
Zhermack
Asiga
DETAX
MoonRay
Pro3dure
Pol-Ease
Formech
© 2022 – syntecshop.com
Privacy and cookies | Terms and Conditions
All prices on syntecshop.com are exclusive of VAT.