Poly Foam Flexible, F150

Poly Foam F-150 is a two component flexible polyurethane casting foam with medium high density. This elastomeric foam gives a free expanding foam after mixing of about 150  kgm-3. The foam is self-skinning, which means that the foam leaves a reasonably smooth skin on the outside. The poly foam F-150 is a durable foam and has excellent physical properties. The typical density with free rise of the foam is between 140 -160 kgm-3 but can achieve an even higher density of, for example, 250 – 500 kgm-3 by confinement.

Poly foams can be cast in our Eurosil (addition) and SG C-Sil silicone rubber molds or in our polyurethane rubbers that are pre-coated with release agent such as our release agent such as our Pol-Ease 2300 or release agent VL.

The Poly Foam F-150 is a two component foam with 100 A: 33-40 B mixing ratio. The Poly foam has a fast cream time of 30-40 sec in the first phase, after which the p.u. foam 2 – 2.5 minutes will foam up to 250 – 500 kgm-3 in an unconfined space. The poly foam F-500 is beige-yellow in color.

This polyurethane foam is self skinning and therefore creates a beautiful skin around the foam.

The Poly foam F-3 and F-5 are foams with a significantly lower density in free expansion and the Poly foam F-200 and F-500 are with a higher density.

Packaging:

Set 1.4 KG (1 kg A + 400 g B) – available online
Set 7 KG (5 kg A + 2 kg B) – available online
Set 35 KG (25 kg A + 10 kg B)
Drum packaging on request

Mixing ratio: 100A : 33 – 40B
100 : 33 Soft
100 : 36 Medium
100 : 40 Hard
Cream Time: 30-40 Sec.
Rise Time: 2-2.5 min.
Free Density: 150 kgm-3.
Molded Density: 250-500 kgm-3