\nHardness (Shore A)<\/strong>: 75
\nMix Ratio<\/strong>: 2A:1B
\nColor<\/strong>: Amber
\nWorking Time (min)<\/strong>: 20
\nTotal Cure (hr)<\/strong>: 16 hr (demold) \/ 7 days (100%)
\nViscosity (cP)<\/strong>: 4.000 (\u00b1400)
\nTear Strength (N\/mm2)<\/strong>: 43.25
\nTensile Strength (N\/mm2)<\/strong>: 4.52
\nType product<\/strong>: Polyurethane rubber
\nApplication: Mould and rubber parts<\/p>\n
Downloads<\/h4>\n\n- TDS Poly 75-75
\n<\/a><\/li>\n- MSDS Poly 75-75 Component A
\n<\/a><\/li>\n- MSDS Poly 75-75 Component Base B<\/a><\/li>\n<\/ul>\n
UFI:<\/strong>\u00a0Poly 75-Series Liquid Rubber Part A<\/em>\u00a0: 6530-2076-600M-JJNA
\nUFI:<\/strong>\u00a0Poly 75-75 Liquid Rubber Part B<\/em>: U340-M0TJ-K002-TA21<\/p>\nMandatory information according to Regulation (EU) 2020\/1149 regarding diisocyanates: From 24 August 2023, adequate training is required<\/strong> for industrial or professional use. The training can be followed at the organization under the following link. Please take into account costs for this training. More information can be found at feica.eu\/Puinfo and https:\/\/safeusediisocyanates.eu\/<\/p>\nProtection:<\/strong><\/p>\n![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/M009-%E2%80%93-Wear-protective-gloves-150x150.png\")
\u00a0![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/M004-%E2%80%93-Wear-eye-protection-150x150.png\")
\u00a0![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/M010-%E2%80%93-Wear-protective-clothing-150x150.png\")
<\/p>\n
Safety instructions:<\/strong><\/p>\n![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/\/GHS09-Warning-_for-cat.-1_-for-cat.-2-4-no-signal-word_-Environment-cat.-1-3-300x300.png\")
\u00a0![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/\/GHS07-Warning-Toxic-cat.-4-Irritant-cat.-2-or-3-Lower-systemic-health-hazards-150x150.png\")
![\"\"](\"https:\/\/syntecshop.com\/wp-content\/uploads\/\/GHS08-Danger-or-Warning-Systemic-health-hazards-300x300.png\")
<\/p>\n
Comp. A:<\/p>\n
Signal word (CLP) : Danger
\nContains : Polyether polyol-TDI prepolymer; m-tolylidene diisocyanate; toluene-diisocyanate
\nHazard statements (CLP) : H315 \u2013 Causes skin irritation.
\nH317 \u2013 May cause an allergic skin reaction.
\nH319 \u2013 Causes serious eye irritation.
\nH332 \u2013 Harmful if inhaled.
\nH334 \u2013 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
\nH351 \u2013 Suspected of causing cancer.
\nPrecautionary statements (CLP) : P201 \u2013 Obtain special instructions before use.
\nP261 \u2013 Avoid breathing vapours, mist.
\nP280 \u2013 Wear protective gloves, eye protection, protective clothing.
\nP304+P340 \u2013 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
\nP342+P311 \u2013 If experiencing respiratory symptoms: Call doctor, a POISON CENTER.
\nP501 \u2013 Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and\/or international regulation.
\nExtra phrases : As from 24 August 2023 adequate training is required before industrial or professional use.
\nComp. B:<\/p>\n
Contains : 4-methyl-2,6-bis(methylsulfanyl)benzene-1,3-diamine; 2-methyl-4,6-bis(methylthio)-1,3benzenediamine<\/p>\n
Hazard statements (CLP) : H317 \u2013 May cause an allergic skin reaction.
\nH411 \u2013 Toxic to aquatic life with long lasting effects.
\nPrecautionary statements (CLP) : P261 \u2013 Avoid breathing vapours, mist.
\nP280 \u2013 Wear protective gloves.
\nP333+P313 \u2013 If skin irritation or rash occurs: Get medical advice\/attention.
\nP362+P364 \u2013 Take off contaminated clothing and wash it before reuse.
\nP391 \u2013 Collect spillage.
\nP501 \u2013 Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and\/or international regulation.<\/p>\n
Information center<\/h4>\n\n- Do I have to use Polyurethane or Silicone rubber to make my mold?<\/a><\/li>\n<\/ul>\n
Release & Adhesion<\/strong><\/p>\nPolyurethane casting rubber such as the poly 75-75 adheres when casting on many surfaces such as various types of metal, wood, polyurethane, plastics, epoxy materials, concrete, plaster and many more other surfaces. If release is required on these substrates, release agents such as our Pol-Ease 2300<\/a>, Lossingsmiddel VL,<\/a>\u00a0Pol-Ease 2350<\/a> and Pol-Ease 2450<\/a> or the other release agents must be used. We always advise to first do a test with the adhesion, release or the suction effect of the rubber on the mold or application. With porous parts made of, for example, wood or plaster, the rubber can be sucked up. You can prevent this by first sealing it with, for example, a pore sealer<\/a>. This is not a release agent, so if it still needs to be released or is poured with a material that will give you adhesion, use a release agent.<\/p>\nAs standard, a polyurethane does bond and silicone does not bond to different materials. This adhesion or no adhesion is not for every material. If you want to generate extra adhesion for, for example, (mechanical) load, we always recommend optimizing this by using an ashesive primer<\/a> for the different substrates. This gives a good bond for both materials. Before using this adhesive, the surface must be thoroughly cleaned and degreased. Blasting or roughening the surface promotes adhesion with or without a bonding primer.<\/p>\n
\n<\/a><\/li>\n
\n<\/a><\/li>\n
UFI:<\/strong>\u00a0Poly 75-Series Liquid Rubber Part A<\/em>\u00a0: 6530-2076-600M-JJNA Mandatory information according to Regulation (EU) 2020\/1149 regarding diisocyanates: From 24 August 2023, adequate training is required<\/strong> for industrial or professional use. The training can be followed at the organization under the following link. Please take into account costs for this training. More information can be found at feica.eu\/Puinfo and https:\/\/safeusediisocyanates.eu\/<\/p>\n Protection:<\/strong><\/p>\n Safety instructions:<\/strong><\/p>\n Comp. A:<\/p>\n Signal word (CLP) : Danger Contains : 4-methyl-2,6-bis(methylsulfanyl)benzene-1,3-diamine; 2-methyl-4,6-bis(methylthio)-1,3benzenediamine<\/p>\n Hazard statements (CLP) : H317 \u2013 May cause an allergic skin reaction. Release & Adhesion<\/strong><\/p>\n Polyurethane casting rubber such as the poly 75-75 adheres when casting on many surfaces such as various types of metal, wood, polyurethane, plastics, epoxy materials, concrete, plaster and many more other surfaces. If release is required on these substrates, release agents such as our Pol-Ease 2300<\/a>, Lossingsmiddel VL,<\/a>\u00a0Pol-Ease 2350<\/a> and Pol-Ease 2450<\/a> or the other release agents must be used. We always advise to first do a test with the adhesion, release or the suction effect of the rubber on the mold or application. With porous parts made of, for example, wood or plaster, the rubber can be sucked up. You can prevent this by first sealing it with, for example, a pore sealer<\/a>. This is not a release agent, so if it still needs to be released or is poured with a material that will give you adhesion, use a release agent.<\/p>\n As standard, a polyurethane does bond and silicone does not bond to different materials. This adhesion or no adhesion is not for every material. If you want to generate extra adhesion for, for example, (mechanical) load, we always recommend optimizing this by using an ashesive primer<\/a> for the different substrates. This gives a good bond for both materials. Before using this adhesive, the surface must be thoroughly cleaned and degreased. Blasting or roughening the surface promotes adhesion with or without a bonding primer.<\/p>\n
\nUFI:<\/strong>\u00a0Poly 75-75 Liquid Rubber Part B<\/em>: U340-M0TJ-K002-TA21<\/p>\n\u00a0\u00a0<\/p>\n\u00a0<\/p>\n
\nContains : Polyether polyol-TDI prepolymer; m-tolylidene diisocyanate; toluene-diisocyanate
\nHazard statements (CLP) : H315 \u2013 Causes skin irritation.
\nH317 \u2013 May cause an allergic skin reaction.
\nH319 \u2013 Causes serious eye irritation.
\nH332 \u2013 Harmful if inhaled.
\nH334 \u2013 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
\nH351 \u2013 Suspected of causing cancer.
\nPrecautionary statements (CLP) : P201 \u2013 Obtain special instructions before use.
\nP261 \u2013 Avoid breathing vapours, mist.
\nP280 \u2013 Wear protective gloves, eye protection, protective clothing.
\nP304+P340 \u2013 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
\nP342+P311 \u2013 If experiencing respiratory symptoms: Call doctor, a POISON CENTER.
\nP501 \u2013 Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and\/or international regulation.
\nExtra phrases : As from 24 August 2023 adequate training is required before industrial or professional use.
\nComp. B:<\/p>\n
\nH411 \u2013 Toxic to aquatic life with long lasting effects.
\nPrecautionary statements (CLP) : P261 \u2013 Avoid breathing vapours, mist.
\nP280 \u2013 Wear protective gloves.
\nP333+P313 \u2013 If skin irritation or rash occurs: Get medical advice\/attention.
\nP362+P364 \u2013 Take off contaminated clothing and wash it before reuse.
\nP391 \u2013 Collect spillage.
\nP501 \u2013 Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and\/or international regulation.<\/p>\nInformation center<\/h4>\n
\n