+31 (0) 186 600 880

Riello Vision VST, 800 – 2000 VA UPS Systems

Riello Vision systems are available in models from 800 VA to 2000 VA with sinusoidal digital technology. The Vision range, with its advanced communication and connectivity options, is the ideal solution for installations that require good protection and versatile power network requirements. The Riello Vision VST series is the ideal solution for the protection of peripheral network systems, servers and network backup systems. You often see the Riello VST come back in server rooms.

Riello VST Vision is an easy to integrate system available in the following models:

  • VST 800 – 800VA
  • VST 1100 – 1100VA
  • VST 1500 – 1500VA
  • VST 2000 – 2000VA

Superior protection
The Vision range uses Line Interactive technology and provides a sinusoidal output. This technology provides an efficiency of 98% and therefore has a lower energy consumption. The Riello Vision VST also provides a high degree of protection against power failures. The automatic voltage regulator (AVR) provides protection against surges, overvoltages and undervoltages without the intervention of the battery. The reduced battery usage ensures that the battery set is 100% available for power outages and can offer greater autonomy. EMI filters then provide further protection against voltage spikes and transients. When the mains power fails, the load is powered by the inverter and receives a perfectly sinusoidal power supply for maximum current continuity and reliability. For energy savings, the Vision range has a shutdown button to reduce energy consumption during periods from zero to zero
prolonged inactivity.

High availability
An EnergyShare connection allows load shedding and the shutdown of less sensitive peripherals to extend battery life for critical loads. Hot Swap batteries can be removed through the front panel for easy and safe UPS maintenance. Battery test function to detect deteriorated battery performance. Deep discharge protection to reduce battery aging.

Cold start function to enable the UPS to start up without mains power.

LCD Display
Vision models have an illuminated LCD display with UPS status information, load and battery performance.

Advanced communication

Multi-platform communication: Multi-platform communication for all operating systems and network environments: PowerShield 3 supervision and shutdown software for Windows operating systems 8, 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Sun Solaris, VMware ES X and other Unix- operating systems.
USB or RS232 serial port interface (selectable)
Expansion slot for interface cards
Status, measurements, alarms and input, output and battery parameters available on the LCD screen.


EnergyShare connection
Possibility to switch on the UPS in the absence of mains voltage (cold start)
Batteries can be replaced by the user without shutting down equipment and without interrupting the load (Hot Swap)
Maximum reliability and PC protection thanks to PowerShield3 monitoring and shutdown software, which can be downloaded for free
Fully configurable with UPS Tools configuration software
Highly reliable batteries (automatic and manually activated battery test)
Built-in short-circuit protection
Automatic restart (when the mains power is restored, after the batteries have been discharged)
GS / Nemko quality mark.

Technical features:

Input voltage: 220 – 240 V.
Voltage tolerance: 162-290 V.
Input frequency: 50/60 Hz automatic selection
Number of input phases: 1
Output voltage: 230… 230 V selectable
Output frequency: 50 or 60 Hz automatic selection
Waveform: Sinusoidal
Number of outgoing phases: 1

Battery type: VRLA AGM maintenance-free lead based
Charging time: 4-6 hours
Auto power off function: Yes
Number of outputs: 4 IEC 320 C13 (VST 800 / VST1100) / 6 IEC 320 C13 (VST 1500 / VST 2000)

VST 800
Active output power: 640 W.
Apparent output power: 800 VA
Dimensions: 120 x 443 x 247 mm
Weight 10.5 kg net

VST 1100
Active output power: 880 W.
Apparent output power: 1100 VA
Dimensions: 120 x 443 x 247 mm
Weight 13.3 kg net

VST 1500
Active output power: 1200 W.
Apparent output power: 1500 VA
Dimensions: 160 x 443 x 247 mm
Weight 16.5 kg net

VST 2000
Active output power: 1600 W.
Apparent output power: 2000 VA
Dimensions: 160 x 443 x 247 mm
Weight 18.5 kg net

The RPS Riello VST 2000 is now available from stock at an extra affordable price for €389 excl. VAT and delivery.



From: 249,00

Order your product directly

Need large armounts?

Accountmanager spreken?
In 3 simpele stappen een offerte aanvragen
Would you like to speak to an account manager?
Request a quote in 3 simple steps